|
Navigation
Overview
Getting Started
How-To
Download
Forum
Contact Us
|
|
Cachya How-To
[How to re-center head position?]
- Press "Set Center" hot key (Default to "Ctl-`")
to set current head position as the "center" of all 6 DOF.
[How to reset track engine?]
- Press "Output On/Off" hot key five times
to reset tracking process.
Software will reset all tracking status.
[How to switch between normal operation mode and calibration modes?]
- Press "Output On/Off" hot key (Default to "Alt-`") twice
to get into Axes calibration mode.
In this mode, selected axis moves in its full range (-10000 to 10000)
then stop at the center.
- Press "Output On/Off" hot key (Default to "Alt-`") three times
to get into POV Switch calibration mode.
In this mode, POV Switch is controlled by keyboard.
Switch buttons are turned off.
- Press "Output On/Off" hot key four times
to get into switch button calibration mode.
In this mode, switch buttons are controlled by keyboard.
POV Switch is turned off.
- In any calibration mode, press "Output On/Off" hot key once
to go back to normal operation mode and set head tracking output at "On" state.
In normal mode, all axes and buttons are controlled by head movements.
- In normal operation mode, press "Output On/Off" hot key once
to toggle head tracking output between "On" and "Off" states.
[How to calibrate joystick axes in game?]
- Enter axes calibration mode.
- In this mode:
- Press "Y-Rotation (Yaw)" hot key (Default to "Alt-1") to calibrate "Y-Rotation".
- Press "X-Rotation (Pitch)" hot key (Default to "Alt-2") to calibrate "X-Rotation".
- Press "Z-Rotation (Roll)" hot key (Default to "Alt-3") to calibrate "Z-Rotation".
- Press "X-Axis (lean)" hot key (Default to "Alt-4") to calibrate "X-Axis".
- Press "Y-Axis (Shrug)" hot key (Default to "Alt-5") to calibrate "Y-Axis".
- Press "Z-Axis (Zoom)" hot key (Default to "Alt-6") to calibrate "Z-Axis".
- Press "All 6DOF" hot key (Default to "Alt-7") to calibrate all axes at the same time.
[How to control POV Switch with keyboard?]
- Enter POV Switch calibration mode.
- In this mode:
- Press "POV Up" hot key (Default to "Alt-1") to simulate "Up".
- Press "POV Up Right" hot key (Default to "Alt-2") to simulate "Up Right".
- Press "POV Right" hot key (Default to "Alt-3") to simulate "Right".
- Press "POV Down Right" hot key (Default to "Alt-4") to simulate "Down Right".
- Press "POV Down" hot key (Default to "Alt-5") to simulate "Down".
- Press "POV Down Left" hot key (Default to "Alt-6") to simulate "Down Left".
- Press "POV Left" hot key (Default to "Alt-7") to simulate "Left".
- Press "POV Up Left" hot key (Default to "Alt-8") to simulate "Up Left".
[How to control Joystick Buttons with keyboard?]
- Enter joystick button calibration mode.
- In this mode:
- Press "Joystick Button 1" hot key (Default to "Alt-1") to simulate "button 1".
- Press "Joystick Button 2" hot key (Default to "Alt-2") to simulate "button 2".
- Press "Joystick Button 3" hot key (Default to "Alt-3") to simulate "button 3".
- Press "Joystick Button 4" hot key (Default to "Alt-4") to simulate "button 4".
- Press "Joystick Button 5" hot key (Default to "Alt-5") to simulate "button 5".
- Press "Joystick Button 6" hot key (Default to "Alt-6") to simulate "button 6".
- Press "Joystick Button 7" hot key (Default to "Alt-7") to simulate "button 7".
- Press "Joystick Button 8" hot key (Default to "Alt-8") to simulate "button 8".
[How to adjust sensitivities with hot keys?]
- Make sure you are in mornal operation mode.
- Freeze motions that you don't want to touch.
- Press "Freeze All 6 DOF" hot key (Default to "Alt-0") once
to toggle all 6 DOF between frozen and un-frozen states .
- Press "Freeze All 6 DOF" hot key (Default to "Alt-0") twice
to unfreeze all 6 DOF.
- Press "Freeze Yaw" hot key (Default to "Alt-1") to toggle "yaw" between frozen and un-frozen states .
- Press "Freeze Pitch" hot key (Default to "Alt-2") to toggle "pitch" between frozen and un-frozen states .
- Press "Freeze Roll" hot key (Default to "Alt-3") to toggle "roll" between frozen and un-frozen states .
- Press "Freeze Lean" hot key (Default to "Alt-4") to toggle "lean" between frozen and un-frozen states .
- Press "Freeze Shrug" hot key (Default to "Alt-5") to toggle "shrug" between frozen and un-frozen states .
- Press "Freeze Zoom" hot key (Default to "Alt-6") to toggle "zoom" between frozen and un-frozen states .
- Press "More Sensitive" hot key (Default to "Alt-7") to increase sensitivity on un-frozen motions.
- Press "Less Sensitive" hot key (Default to "Alt-8") to decrease sensitivity on un-frozen motions.
- Press "Freeze All 6 DOF" hot key (Default to "Alt-0") twice to un-freeze all.
|
|
|
